{"id":9312,"date":"2026-09-28T16:44:19","date_gmt":"2026-09-28T13:44:19","guid":{"rendered":"https:\/\/euroformat.com\/pidlogovi-elektrotehnichni-shafy-std\/"},"modified":"2026-09-28T16:52:04","modified_gmt":"2026-09-28T13:52:04","slug":"pidlogovi-elektrotehnichni-shafy-std","status":"publish","type":"post","link":"https:\/\/euroformat.com\/en\/pidlogovi-elektrotehnichni-shafy-std\/","title":{"rendered":"STD floor-standing electrical enclosures"},"content":{"rendered":"

STD floor-standing electrical enclosures<\/a><\/strong> are designed to house electrical equipment where a floor-standing solution is required and the internal configuration needs to be adapted to the requirements of a specific project.<\/p>\n

Purpose of the series<\/h2>\n

The STD series is used for the organised installation of electrical equipment. Its floor-standing design allows the enclosure to be configured according to the components used, their mounting method and the way they are connected. When selecting an enclosure, it is important to consider the degree of protection, construction, equipment configuration and installation conditions.<\/p>\n

For this reason, an electrical distribution enclosure<\/strong> should not be selected on external dimensions alone. The equipment, operating conditions and internal layout requirements should be defined first.<\/p>\n

STD and STD.UP<\/h2>\n

STD and STD.UP are both floor-standing solutions, but the specific version should be selected in accordance with the project specification. Selection should not be based solely on similarities in the product name or appearance.<\/p>\n

If the project specifies a particular STD enclosure<\/strong>, the required construction, configuration and technical parameters should be checked against the available version of the series before ordering. This helps prevent the characteristics of one modification from being incorrectly applied to another.<\/p>\n

IP40 and IP54<\/h2>\n

IP is a classification system that defines the degree of protection provided by an equipment enclosure against external influences. The IP designation is followed by two digits: the first indicates protection against the ingress of solid foreign objects, while the second indicates protection against water. Both values should therefore be assessed separately when selecting an enclosure.<\/p>\n

An IP40 enclosure<\/strong> is protected against the ingress of solid foreign objects measuring 1 mm or more. The second digit, 0, means that this classification does not provide protection against water. This type of enclosure should therefore be selected with the conditions of the installation environment in mind.<\/p>\n

For an IP54 enclosure<\/strong>, the first digit, 5, indicates a dust-protected design: dust ingress is not completely prevented, but any amount that enters must not interfere with normal operation of the equipment. The second digit, 4, indicates protection against splashing water from different directions.<\/p>\n

IP40 and IP54 are therefore intended for different operating conditions. A higher numerical rating should not be selected simply as an additional safety margin. The required degree of protection should be determined by the project specification, installation location and the actual external influences on the enclosure.<\/p>\n

Frame and panels<\/h2>\n

The structure of a floor-standing enclosure provides the basis for installing equipment and the required internal components. The frame and panels should be considered as parts of a single enclosure system.<\/p>\n

It is important to determine in advance how access to the equipment, installation and connection will be organised. This directly affects the choice of enclosure configuration.<\/p>\n

Equipment installation<\/h2>\n

The internal layout begins with the equipment list. It is necessary to determine which components will be installed, how they will be mounted and how the connections will be arranged.<\/p>\n

This is why the layout and technical specification should be prepared first, followed by the selection of the required internal components. This approach helps avoid a situation where the enclosure has already been selected but the required equipment cannot be installed correctly.<\/p>\n

Accessories<\/h2>\n

Accessories help adapt the internal space of the enclosure to the specific requirements of the project. The required set depends on the equipment, its mounting method, cable routing and project requirements.<\/p>\n

The enclosure should not be equipped with additional components simply \u201cjust in case\u201d. Each element should correspond to the planned configuration and perform a defined function.<\/p>\n

How to select a floor-standing enclosure for a project<\/h2>\n

Start with the technical specification: define the equipment, installation conditions, required degree of protection, component mounting method and cable arrangement. The appropriate STD or STD.UP version and the required accessories can then be selected.<\/p>\n

Key parameters when selecting a floor-standing electrical enclosure<\/h2>\n\n\n\n\n\n\n\n\n\n\n
Parameter<\/strong><\/th>\nWhat to consider<\/strong><\/th>\n<\/tr>\n
Series<\/td>\nSTD or STD.UP in accordance with the documentation and technical specification<\/td>\n<\/tr>\n
Degree of protection<\/td>\nIP40 or IP54 depending on operating conditions<\/td>\n<\/tr>\n
Equipment<\/td>\nType, dimensions and mounting method<\/td>\n<\/tr>\n
Internal configuration<\/td>\nPanels, profiles and mounting components<\/td>\n<\/tr>\n
Cable routing<\/td>\nCable entry direction and cable arrangement<\/td>\n<\/tr>\n
Accessories<\/td>\nAccording to the specific internal layout<\/td>\n<\/tr>\n
Installation location<\/td>\nIndoor conditions and external influences<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Need help selecting a floor-standing enclosure?<\/h3>\n

Provide the Euroformat specialists with the technical specification, equipment list, required dimensions and information about the installation conditions. This will help determine the appropriate enclosure version, configuration and parameters for the specific project.<\/p>\n

Contact Euroformat for advice and assistance in selecting a floor-standing enclosure to meet your requirements: https:\/\/euroformat.com\/en\/contacts<\/a><\/p>\n

Frequently asked questions<\/h2>\n

What is the difference between STD and STD.UP?<\/strong><\/p>\n

Both designations refer to floor-standing solutions, but the characteristics of each specific version should be checked against the current Euroformat documentation. The design features of STD should not automatically be assumed to apply to STD.UP, or vice versa. The appropriate version should be selected according to the requirements of the specific project.<\/p>\n

When is IP54 required?<\/strong><\/p>\n

IP54 is required when the installation conditions call for protection of the equipment against dust and splashing water. The first digit, 5, indicates a dust-protected design: limited dust ingress is permitted, provided that it does not interfere with normal operation of the equipment. The second digit, 4, indicates protection against splashing water from different directions. IP54 should therefore be selected according to the actual operating conditions and project requirements, rather than solely according to the type of equipment installed inside the enclosure.<\/p>\n

Can the internal configuration be changed?<\/strong><\/p>\n

The internal layout should be configured according to the equipment and the components available for the specific series. The feasibility of a particular configuration should be checked before ordering. This makes it possible to coordinate the enclosure, mounting components and cable routing in advance.<\/p>\n

What components are required for equipment installation?<\/strong><\/p>\n

This depends on the equipment list and the mounting method of the individual components. The equipment layout should be prepared first, after which the required mounting components and accessories can be determined. There is no universal set suitable for every project.<\/p>\n

Conclusion<\/h2>\n

An STD floor-standing enclosure should be selected based on the project requirements first, with the enclosure itself chosen afterwards – not the other way round. The key factors are the equipment, operating conditions, required degree of protection and internal configuration. The appropriate structural version and accessories can then be selected.<\/p>\n","protected":false},"excerpt":{"rendered":"

STD floor-standing electrical enclosures are designed to house electrical equipment where a floor-standing solution is required and the internal configuration needs to be adapted to the requirements of a specific project. Purpose of the series The STD series is used for the organised installation of electrical equipment. Its floor-standing design allows the enclosure to be […]<\/p>\n","protected":false},"author":1,"featured_media":9309,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[32],"tags":[],"class_list":["post-9312","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-test-category-1"],"acf":[],"_links":{"self":[{"href":"https:\/\/euroformat.com\/en\/wp-json\/wp\/v2\/posts\/9312","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/euroformat.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/euroformat.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/euroformat.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/euroformat.com\/en\/wp-json\/wp\/v2\/comments?post=9312"}],"version-history":[{"count":3,"href":"https:\/\/euroformat.com\/en\/wp-json\/wp\/v2\/posts\/9312\/revisions"}],"predecessor-version":[{"id":9319,"href":"https:\/\/euroformat.com\/en\/wp-json\/wp\/v2\/posts\/9312\/revisions\/9319"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/euroformat.com\/en\/wp-json\/wp\/v2\/media\/9309"}],"wp:attachment":[{"href":"https:\/\/euroformat.com\/en\/wp-json\/wp\/v2\/media?parent=9312"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/euroformat.com\/en\/wp-json\/wp\/v2\/categories?post=9312"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/euroformat.com\/en\/wp-json\/wp\/v2\/tags?post=9312"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}