Frequently asked questions

If the cause is related to the building structure, such as deviations in the shaft construction or fixings, responsibility should be coordinated between the lift manufacturer, installation contractor and developer or building management organisation, depending on when and where the issue occurred. This is why warranty obligations should be clearly defined when the installation agreement is signed.

The character and level of sound can differ depending on the drive design, but this does not mean that one type is always quieter than another in absolute terms. Much depends on the condition of the specific components and the quality of installation. It is therefore more useful to compare the actual equipment in a specific lift shaft rather than drive types in isolation.

Partly, yes. Adjusting the door drive, replacing worn rollers or renewing lubricants in mechanical components can often noticeably reduce the noise level. However, if the cause is a worn drive or problems related to shaft installation, minor maintenance alone may not be sufficient. The exact scope of work should be determined after technical diagnostics.

Yes. Under a heavier load, the drive and mechanical components work more intensively, which can slightly change the character of the sound during travel. Within properly functioning equipment, this can be normal and does not by itself indicate a fault. However, if the noise under load becomes sharp, irregular or noticeably different, the lift should be checked.

It is useful to have a clear idea of the architectural concept and how the lift cabin should relate to the building interior. At the same time, the design cannot be considered separately from the technical configuration of the lift, so the initial project data is also required. Euroformat selects lift equipment with the parameters of the specific project in mind.

Different lift cabin designs can be considered depending on the specific project and the available cabin options. From a design perspective, the lifts can support the same architectural concept without every element being identical. The technical feasibility of the selected options should be agreed separately during the equipment selection process.

Lighting directly affects how users perceive the colours, textures and overall composition of the lift cabin. It should therefore be selected together with the other design elements rather than after the overall concept has been finalised. The chosen solution must also be compatible with the technical capabilities of the selected equipment configuration.

The lift cabin does not need to replicate the lobby materials exactly in order to achieve a coherent design. It can be visually connected to the interior through colours, textures, detailing or other elements of the architectural concept. The specific solution should be considered in relation to the available design options and the technical configuration of the lift.

Accessories should be selected once the equipment list and layout are known. This makes it possible to determine which components are actually required for installation and for organising the internal space. The final configuration should be agreed before the order is placed.

Cables require a defined method of entry, routing and connection to the installed components. Their quantity and arrangement should therefore be considered during the enclosure layout stage. This helps ensure that the internal components are compatible with the actual equipment configuration.

No. The degree of protection is only one of the parameters to consider. The equipment, overall dimensions, internal configuration and installation conditions must also be taken into account. Only this combination of information allows the appropriate version to be selected accurately.

The equipment itself determines the requirements for the internal space and mounting arrangement. Sufficient space must also be provided for connections and cable organisation. Selecting the enclosure before preparing the internal layout may therefore result in an unsuitable configuration.